INFINAM® PA
INFINAM® PA

INFINAM® PA

PA613 nylon powders for industrial 3D printing

Polyamide 613-based high-performance powder materials INFINAM® PA has been developed for applications in higher temperature range as part of its polyamide 6 series and is perfectly matched to common powder bed fusion (PBF) 3D printing technology.

WHAT ARE PA613 NYLONS?

Polyamide 613 or short PA613 is a thermoplastic material combining advantages of short and long chain polyamides. In this regard, Evonik's PA613 nylon powder material unites PA6 (short chain) like material properties of higher heat resistance, higher stiffness in dry condition and good impact resistance with PA12 (long chain) like material properties of lower water uptake, higher chemical resistance and good mechanical behaviour. 

Key material properties of Pa613 nylons powders

  • High temperature resistance
  • Low water uptake
  • Excellent mechanical properties
  • Excellent surface resolution and feature detail
  • Good resistance against numerous chemicals

Product name

Description

3D Technology

Download

INFINAM® PA 6005 P

Natural colored fine powder

Powder Bed Fusion
(SLS)

INFINAM® PA 6005 P 3D printing material for applications in higher temperature range

Evonik’s INFINAM® PA 6005 P (PA613) nylon powders feature high mechanical strength as well as excellent chemical and temperature resistance. Its heat deflection temperature (HDT B) is around 195°C. Compared to other difficult-to-process materials of the polyamide 6 family, INFINAM® PA 6005 P has an impressively low water absorption rate - less than 3 percent - which has positive effects on both the processability in the 3D printing process, and the dimensional stability of the printed component.

INFINAM® PA 6005 P is a natural colored fine powder especially for the use in additive fabrication. Our product is suitable for manufacturing of functional prototypes, manufacturing of individual units as well as serial parts. INFINAM® PA 6005 P is especially suitable for powder bed fusion technologies.

PA613 nylon powders manufactured in Evonik's own process

INFINAM® PA 6005 P is a nylon powder from Evonik based on polyamide 613 and is designed for 3D printing technologies such as selective laser sintering (SLS). The polymer is produced using Evonik's own special precipitation process at the Marl Chemical Park in Germany and is suitable for 3D applications in the higher temperature range. 

Precipitation is a purely physical process that Evonik uses on a large scale for its powder production. Polyamide 613 granules are dissolved in a suitable solvent under defined pressure and temperature, and the resulting solution is then subjected to an equally controlled cooling process. During this process, the solvent separates again from the polymer, and the latter precipitates to form a fine powder of Evonik's INFINAM® PA613 branded 3D printing nylon material.

LET'S EXPLORE YOUR NEXT 3D APPLICATION TOGETHER!

 

The better we know you, the faster we can support you!

Podcast subscription

Listen to our exclusive podcast "Unbounding 3D printing at scale" by subscribing to our newsletter.